Monthly Archives: November 2010

Lockup when using Nawcom’s Mod CD / Empire EFI / iBoot

I’m in the process of making my machine dual boot Windows 7 and OSX.  I was having some trouble getting the Nawcom Mod CD to do anything other than freeze.  Pressing F5 crashes the installer, as does selecting a device to boot from.   This is an issue stemming from the Empire EFI swap CD they’re working from, as several variations were showing the same behavior.

The disc started working normally once I disabled two extra JMicron SATA controllers integrated into my motherboard, as well as my unused IDE controller.  I’m guessing that there is a driver missing from the boot CD that makes it unable to handle those JMicron controllers.  I haven’t had the chance to cycle through each one to see if a specifc one is causing it, or if it’s just the IDE or just the JMicrons.

In any case, if someone else has this issue hopefully they will stumble across this post.  Now to figure out why I’m getting a Kernel Panic before I even see the install screen…

Projects for the Co-Lab

Although I haven’t signed up for a membership yet, I’ve spent quite a bit of time at the Quad Cities Co Lab ( and I’m really starting to get the itch to start a project.  Tonight I’ll be attending a Microcontroller programming class there, and I have two more ideas I wanted to document.  One of them is going to happen, the other may take a bit longer, and may not entirely be my project.

First, the simple one.  I have a Hauppauge WinTV-HVR-950Q that gets very hot during use.  I opened it up, and found the chip responsible for all the heat:

TV Tuner - Case Removed

TV Tuner - Case Removed

There isn’t anything too lofty here.  I found some heatsinks on Newegg, and they even come with thermal tape to attach to the chip.  What I’m really hoping to do is drill holes in the outer casing that the fins / poles on the heatsink will fit through.  If I do it right it should look really nice.

The next project has two parts.  The first would be to build a laser.  There are kits available to make 150mw blue / violet lasers.  Here is a video showing how they perform.  This is not the kit I would be building.  The kit is a lot more bare-bones.


So it’ll be a nice, bright laser and will probably work great for the parlor tricks shown in the video.

Now, I was inspired when I saw this Instructables article on making a wood-etching laser pen. I thought transmitting a laser through fiber optic would be too “lossy” to still etch or cut.  But if it can be done through fiber, the process of building a low-power laser cutter becomes a lot more practical.  I need a plotter / CNC platform to control it though.  And, well… I had this crazy idea, considering the fiber optics are so light…

Etch-A-Sketch Laser Cutter

Yes, I actually propose using an Etch-A-Sketch as the plotter.  There are plans available to build a computerized Etch-A-Sketch, I just want to change out the etching head with a laser.

Realistically, we probably won’t use an Etch-A-Sketch.  I bought one and (with a friend’s help) took it apart, the insides are a little tight to fit components in.  And also, those things are filled with aluminum powder.  But the main stopping point is that I’m worried about the parts slipping, making the cutter unreliable.  They’re toys, not exactly designed for precision.

My friend Mark has taken some interest in this project.  He wants to see a laser cutter built, and is already familiar with programming the Arduino microcontrollers we’d be using.  Hopefully we’ll be able to work together and build this thing.  I already have some printers I’m going to give him, we’re hoping there are usable stepper motors inside.

Several other people at the Lab have mentioned building a laser cutter, honestly I’d just like to see this thing built. If I’m not involved it’s unfortunate, but I’ll be just as happy to see someone else complete one of these things.

My last project is to learn how to program the Arduino, which will start with tonight’s class.  I don’t have any ideas for it yet, but I also don’t really understand what the Arduino can do.  I’m thinking once I have a grasp of that, I’ll get some ideas.